3 * 380VAC Non-Neutual Three-Phase Phase Failure, Asymmetry, Sequence Relay

relayMotors caused from network.Usage and Working PrincipleMake the connections of the device in accordance with connection scheme.Normal Operation (No Error): When the voltage are at normal values and the phase sequence is correct, the relay gets activated and the OUT LED is on.Asymmetry Error: When any phase goes out of the normal range, the ERR LED flashes (at 2 second intervals), the OUT LED is off and the relay deactivated.Relay is Activated: 2 (COM) and 3 (NC) short circuit, 1 (NC) and 2 (COM) open circuit.Relay is De-activated: 2 (COM) and 1 (NC) short circuit, 1(NC) and 2 (COM) open circuit.MaintenanceSwitch off the device and release from connections. Clean the trunk of device with a swab. Don't use any conductor or chemicalmight damage the device. Make sure device works after cleaningWarningsPlease use the device according to the manual.Don't use the device in wet.Include a switch and circuit breaker in the assembly.Put the switch and circuit breaker nearby the device, operator can reach easily.Mark the switch and circuit breaker as releasing connection for device.SpecificationsOperating Voltage(Un)....: 3 x 380V ACOperating Frequency.......: 50/60 Hz.<;;6VAOperating Temperature..: -20°C.....+55°CAsymmetry...........: ±%30Display..................: OUT & ERR LEDsConnection Type..........: Terminal connectionContact....................:5A/250V AC (Resistive Load)Cable Diameter.................: 1,5mm²Weight................................: Max. 110gr.Mounting....................: Assembled on the din railOperating Altitude..........:

• relay